2-way manifold IV20
With 2-way manifolds, shut-off valve and bleed are standard features. Shut-off valves isolate measuring instruments such as pressure gauges, pressure switches or transmitters from the process. By closing the valve, the instrument can be safely disassembled for recalibration or replacement. The purge valve allows safe venting before the instrument can be disassembled or inspected.
Thanks to the non-rotating end spindles, the wear of the sealing parts is very reduced. This provides a significant increase in the life of the valve, especially when closing/opening cycles are frequent.
The anti-ejection bonnet of the valve greatly improves the safety of use, especially for high pressure applications.
WIKA offers the option of assembling the valves with pressure measuring instruments and also other accessories to obtain a ready-to-install ("hook-up") assembly. To ensure the performance of the sub-assembly, it is subject to an additional leak test.
Applications:
- Shut-off and vent valve for pressure measuring instruments
- For aggressive, non-viscous and non-crystallizing gaseous and liquid media, also in aggressive atmospheres
- For the Process industry: Oil & Gas, chemical and petrochemical industries, energy production, water treatment
Features:
- Wear-free execution due to non-rotating spindle inside the bonnet
- Easy handling of valves even under high pressure
- Enhanced safety thanks to the anti-ejection cap
- The valve has been tested for tightness in accordance with leak rate A BS6755 / ISO 5208
- Specific assemblies of valves and instruments (on request)