Français
Double/single acting hydraulic rotary lever clamping cylinder with spring return
Rotary lever clamping cylinders are very suitable for clamping devices where space is limited. Thanks to their compactness, rotary lever clamping cylinders can be used in multiple ways in clamping devices where space is limited, often offering flexible solutions.
Material: Steel body and piston. Finish: Burnished body.
Hardened piston. Note: The indexable handle of the rotating lever clamping cylinder is connected to the piston rod. Loosening and opening of the indexable handle is carried out by means of a spring for single-acting rotary lever clamping cylinders and by means of pressurized fluid for double-acting cylinders. On rotary lever clamping cylinders, the oil supply is via drilled channels.
When clamping with the rotary lever clamping cylinder, the indexable handle moves in a straight path towards the workpiece to clamp it. To loosen the workpiece, the indexable handle retracts until the workpiece can be removed from above without risk of collision. The individual stroke of a rotary lever clamping cylinder depends on the choice of the indexable handle.
The cleanliness of the clamping elements must be checked regularly and cleaned if necessary.
Care should be taken to ensure that the mounting position does not cause chip nests to form in the rotating area of the indexable handle of the rotary lever clamping cylinder.
The flange of the rotary lever clamping cylinder must be adjusted to the height of the workpiece during assembly and the clamping point must be positioned horizontally.
The correct positioning of the rotary lever clamping cylinder allows the tolerances of the workpieces to be optimally compensated despite a short indexable handle.
Clamping cylinders with rotating levers can generate significant forces. It is then necessary to ensure that the workpieces and clamping devices are designed to withstand such loads.
Rotary lever clamp cylinders can be equipped with custom indexable handles. The clamping force of a rotary lever clamping cylinder depends on the length of the indexable handle.
The indexable handle for rotary lever clamping cylinder is not included.
Observe safety instructions. Instructions for use: Drilled channels. Technical data: Max. operating pressure. : 400 bar. Assembly: See assembly outline. Advantages: - Absence of transverse forces during tightening.
- Small footprint.
- Varied choice of indexable handles.
- Collision-free access to the workpiece.
- Wireless pressure supply. On request: Larger piston strokes and diameters, with optional position control. Accessories: Indexable handle for rotary lever clamping cylinder 04624-30.
