Français
Clamping hook with base and indexable lever with anti-friction bearing
The clamping hooks with base and anti-friction bearing allow you to manually tighten components by operating the indexable lever.
With the indexable handles and the integrated anti-friction bearing, the clamping force can be increased by 75% compared to standard indexable handles. Tightening and loosening also requires less manual force.
The increase in clamping force is achieved by the integrated axial needle bearing, which generates very low surface friction on the fixed bearing surface when clamping. The hardened backing washers are designed for high clamping forces, and the bearing guarantees a long service life thanks to its high load capacity.
Material: Base body and clamping hook in treated steel.
High pressure injected zinc handle conforming to DIN EN 12844.
Steel components of the anti-friction bearing, strength class 5.8 Finish: Base body and clamping hook treated and burnished.
Handle with plastic coating.
Anti-friction bearing steel components burnished.
Axial needle bearing with ground and hardened support washers. Instructions for use: The handle is engaged in the non-actuated state in the threaded insert by means of a toothed ring. By lifting the handle, it can be repositioned and re-engaged in the ring gear using the force of the spring.
