Reel unwinder - AXO 10 TONS

For reels up to 10 tons

The AXO 10 TONNES is intended for the unwinding of large reels, on site or in the workshop.

The range includes 4 models which differ according to:
- the maximum diameter of the reel: 2200mm or 3200mm
- the maximum width of the reel to unroll: 1350mm or 1900mm
- the bearings that support the shaft: with or without ball bearings.

Landings
With bearings: ideal for manual pulling at low speed.
The process is very smooth.
Without bearings: ideal for motorized pulling (winding machine, winch).
The slide bearing exerts a natural brake which reduces the inertia of the reel at the end
of the progress.
The bearings are removable, but hung by a chain to avoid
to lose them.

Axis
Diameter 76mm
Supplied with 2 flat centering devices, which prevent the reel from slipping on one side.

Reel lifting
By hydraulic cylinder with foot pump.
Lifting is very fast thanks to the removable bearings:
- we introduce the axis in the reel
- the bearings are positioned just under the axis (7 positions for the EAX100-22, 13 positions for the EAX100-32)
- a few centimeters of lifting are enough to take off the reel from the ground and to be able to unroll.

Shift
The stands are easy to move by tilting, using the horizontal bar, on 2 wheels Ø 160mm.

Use in front of a winding machine
Fixing to the floor is mandatory.

Code and dimensions: see technical sheet