Manual coiler - MANU-COCCI

The most efficient manual crowner-coiler
The frame of the MANU-COCCI®, of an innovative design, gives it two advantages compared to conventional roll-up machines:
- It is very stable on the ground, therefore well suited for making cable cuts in front of a reel rack
- For this it is equipped with two fixed wheels, parallel to the rack, and 2 castors-brake, pivoting
- It is easily moved thanks to 2 ergonomic handles
- The device can be chosen in an economical manual version (MANUCOCCI ®) then later motorized (MOTO-COCCI®)
- If the volumes of work become important
- Dimensions: 1,500 mm x D 960 mm x H 1,530 mm
- Weight: approx. 110 kg

MANU-COCCI® winder version
It allows winding on all types of commercial reels (plastic, plywood, etc.) with the following dimensions:
- Max Ø: 850 mm
- Maximum width: 366 mm (if Ø central hole 82 mm)
- Ø mini central hole: 25 mm
The reel is driven by a crank and by a Ø 15 mm dog finger, with an adjustable position on a rack (from 40 to 200 mm from the axis)
The MANU-COCCI® is equipped with the M50 measuring device for cable Ø max. 50 mm Depending on the type of cable to be measured and the frequency of use, its measuring wheel can be made of ribbed synthetic or polyurethane
In order to properly arrange the turns of cables next to each other, the measuring device, equipped with a handle, is mounted on a shearing bench
With the new guidance system, the back and forth movement is effortless.

MANU-COCCI ®
Winder + crowner version
It is identical to the version described above and allows, in addition, to make crowns thanks to a removable gavette.
2 models of gavettes to choose from.
The 2 gavettes have an outside diameter of 750 mm.
They are made of galvanized steel.
Light and easy to handle outer flange (in aluminium).
Cable end quick release system.
Openwork gavette to simplify the tying of the crown.
The width is adjustable in 3 positions: 130/180/230 mm.
The drum is made up of 4 blades.
It is the adjustment of the barrel diameter that distinguishes the 2 gavettes.

ADJUSTABLE Gavette
The diameter of the barrel is adjustable by screwing (2 screws on each of the 4 blades),
in 7 positions: 190/240/290/340/390/440/490 mm.

QUICK ADJUST Gavel
Each blade is equipped with an indexable finger which allows:
- tool-free adjustment of the inside diameter in 4 positions: 330/440/560/670 mm
- very easy extraction (“removal”) of the crown.

- Reconditioning of electric cable, lifting cable - Preparation for site shipment or packaging for industrial production