Wilo-DrainLift WS 40/50
Wastewater lifting station or valves in accordance with standard EN 12050 -1.
Wastewater lift or valves with or without particles or faeces, each time the level of evacuation is located below the collection network.
Benefits
*Installation flexibility
* Fully buried indoor and outdoor installation
* Adaptable thanks to the inlet drilling possible all around the tank
* Installation flexibility thanks to the 30cm screwable extension
* 4 drilling areas for the arrival of effluents
* Single phase and three phase versions ƒ Wide range of pumps available ƒ Ease of use
* "All-in-one" tank principle: non-return valve, shut-off valve and internal piping integrated and mounted
* Easy maintenance and service
* Easily removable pump(s)
* Integrated fixing for level regulation
* Box delivered in the 2-pump version
* Pumps and tank anti-corrosion and 100% sealed (odors, gases and liquids)
* Flow rate up to 25 m3/h * Manometric head up to 7 mCE * Passage size: 40 to 44 mm * Maximum water temperature: +40°C * Number of pump(s): 1 or 2 * DN inlet manifolds: DN 100 ƒ DN discharge orifice: G 2''1/2 ƒ Ventilation orifice: 75 mm * HDPE tank * PE cover * Lip seal kit and hole saw diameter 110 mm * With box (two pumps) or without box (one pump) * Level detection by float switch (one pump) or IPAE probe (two pumps) * 316 stainless steel pipe * 1/4 turn PVC valve * Cast iron ball check valve