VHM Series Geared Volumetric Flow Meters, from VSE
The VHM Series flowmeters have been specially designed for low viscosity or abrasive fluids, such as paints, inks, chemical and pharmaceutical compounds, two-component fluids etc. With 316 stainless steel body and gears, tungsten carbide bearings and PTFE coated FPM seals, they stand up to the toughest conditions. Dead zones are extremely reduced, making rinsing particularly easy. Their low mass allows them to be placed on the wrists of robots, as close as possible to the injection nozzle Many options are available such as Atex, signal transmission by optical fiber (Atex), titanium body, etc.
AREAS :
Painting robots
Dosage chemical, petrochemical
Pharmaceutical
Inks and dyes
process
Type: volumetric flowmeters with spur gears Flow rate range: from 0.01...1 l/min to 0.5...20 l/min Accuracy: ±0.5...1% of the measured value according to the viscosity Repeatability: ±0.05% under the same operating conditions Output: a frequency signal (x1, x2 or x4) or optical fiber with converter Frequency: up to 1,000 Hz Materials: 1.4404 stainless steel body / 1.4462 gears Bearings: Tungsten carbide slides Seals: PTFE coated FPM (standard), NBR, PTFE Pressure: 250 bar max Viscosity: 1...20,000 cSt Power supply: 7...30 VDC (5...9 VDC Atex) Mounting: on base (contact us) Pos