Pressure transmitters for low pressures LOPRES LP1000, from ESI
The LP1000 series pressure transmitters are designed to measure very low pressures, with a minimum range of 0...50 mbar without sacrificing performance. The advanced cell design provides very low hysteresis and excellent long-term stability, which is rarely the case when measuring low pressures. Thanks to the combination of the stainless steel body, the nitrile O-ring and the stainless steel measuring element, the transmitters of the LP1000 series are suitable for measuring most fluids in the range of 0 to 100 mbar and more. . For pressures below 100 mbar, the stainless steel measuring element is replaced by a silicon sensor, ideal for non-corrosive gases and various silicon-compatible liquids. These transmitters are particularly precise and stable over time. Available for pressure ranges from 0...50 mbar to 0...500 mbar, and with analog output type 10 mV/V, 0 – 5 V, 0 – 10 V or 4 – 20 mA. The spectrum of applications includes laboratories and test centers and clean rooms, air and gas pressure control, leak detection and low hydrostatic pressure measurements.
AREAS :
Testing laboratories and clean rooms
Air and gas pressure control
Leak detection
process
Test benches
Type: pressure transmitter for low pressures Sensor: high resistance silicon piezoresistive cell Analogue output: 4...20 mA (2 wires), 0...10 V (3 or 4 wires), 0...5 V ( 3 or 4 wires) or 10 mV/V (4 wires) Reference pressure: relative Pressure range: from 0...50 mbar to 0...250 mbar Power supply: depending on the type of analog output Materials: body in 304 stainless steel, wet parts in 316 steel Overpressure resistance: up to x4 of full scale, see sheet NLHR accuracy: ? ±0.5% of BFSL span Adjustment: offset and gain Connection: G1/4, NPT1/4, G1/2, NPT1/2 Seal: nitrile Tempered