Français
PJ4-4000 pump
The Resato PJ4-4000 pump operates on the booster principle, driven by an electrically driven hydraulic pump using only 25 liters of oil. The pressure of the intensifiers is continuously controllable from the HMI or the pump, over a working range of 300
at 3800 bar. The pump, via its touch screen controller, will follow the instructions of the program and will only consume electricity and water if necessary.
An integrated 2.5 liter high-pressure accumulator minimizes pressure fluctuations . This allows a considerable reduction in the wear of the tubes and fittings subjected to the very high pressure. In addition, this technological choice offers a better cutting result because the depression, the flow rate and the volume of abrasive consumed are 100% controlled. As a result, there is virtually no limit to the materials that can be cut.
- Pump driven by a 30 kW motor
- Continuously programmable working pressure, from 300 to 3800 bar
- Capacity up to 3.8 L/min feeding up to two heads at the same time (≤ nozzles diam 0.25mm max)
