LOVATO ELECTRIC
MEASURING CENTER, NETWORK ANALYZER
Description
NETWORK ANALYZERS DMG7500, DMG8000, DMG9000
The network analyzers represent the heart of the system: they measure the electrical voltage in the switchboard and the input current, record the total measurements upstream of the distribution and the measurements of each individual load monitored available on their display. The electrical quantities can also be visualized via the integrated communication ports (RS485 or Ethernet).
The EASY BRANCH system consists of a few elements to add to the network analyzer.
Up to 33 three-phase measurement points or 99 measurement points
single-phase can be obtained!
No special cable is required to connect the current measurement modules to the EASY BRANCH bus: a standard Cat.6 Ethernet cable is sufficient.