Français
Electric self-propelled stacker CDDR15-III 1T5 x 5M60
Electric self-propelled stacker CDDR15-III 1.5Tx5.60M
The CDDR15-III stacker has a safe, well-developed design, thanks to the presence of a modern AC control system and an emergency reversal button; as well as emergency shutdown capabilities and a built-in pressure relief valve that protects against overload. In addition, the equipment has a limit switch that is triggered when the maximum height is reached. The lifting capacity is 1.5 tonnes, the lifting height is 5.60 m and the pickup height starts at 90 mm. The stacker is easy to maintain and use thanks to a simple, fast and reliable connection using CANbus technology.
Lifting and moving are carried out without the physical effort of the operator. It allows you to transport loads as quickly and easily as possible. Effective for use in labor-intensive warehouses. The traction battery offers 8 hours of operation. Controlled by buttons on the handlebars.
Additional benefits:
- Multifunctional BDI display with hour counter
- Stepless speed control system
- Waterproof and dustproof motor design
- Vertical engine with small turning radius
- Low risk of collision thanks to minimization of blind spots
- Low center of gravity for a balance of stability and efficient speed
- The possibility of separating the mast from the frame with subsequent replacement
- The ability to easily pass through a low door or gate
- Intuitive multifunction control button
Technical characteristics :
Ability. t: 1.5
Lifting height, m: 5.60
Travel speed, km/h: 6
Fork length, mm: 1150
Fork width, mm: 695
Turning radius, mm: 1575
Vehicle width, mm: 820
Total length, mm: 2055
Height in folded position, mm: 2,410
Maximum height, mm: 6000 mm
Li-on battery 24V / 225Ah
Weight, kg: 1225
