Engine mounting kit 8 40 D14

Expansion hub coupling D16/d13, Al/Ku Torque support 8 40, galvanized steel Coupling housing D80/d50 BON, Al 3 screws Chc M6x50-DIN 6912, galvanized steel Drive shaft D14, St 2 hexagonal screws M6x25 -ISO 4017, zinc-plated steel Key DIN 6885-A-5x5x25, St Motor mounting kit 8 40 D14 connects a D14/D11 bevel gearbox to the drive pulley of a belt or toothed belt conveyor . It is installed on the right or left side of the conveyor on the housing of the coupling kit. The gearbox is screwed onto the coupling housing and can be positioned in 90° increments. The drive shaft is inserted into the hollow shaft of the gear unit without additional machining. The expanding hub coupling compensates for an axial offset of the drive pulley.

Drive elements With the item conveyor system you can combine motor, gearbox and synchronization according to your specifications. Since the drive components are compatible with all conveyors, you can always use the combination that best suits your transport mission and production environment. In addition, item motor mounting sets give you maximum freedom to orient the drive mechanism. Tip: Our online configuration help will allow you to find the conveyor perfectly adapted to the parameters of your project.