Français
Electronic hygrotherm with remote probe ETF 012
The electronic Hygrotherm controls the temperature and relative humidity in cabinets and boxes containing electrical / electronic equipment. It activates the heating or the ventilation according to the setpoints of temperature or hygrometry adjusted, thus making it possible to avoid condensation and corrosion in the cabinet. Thanks to its wide supply voltage range, the hygrotherm can be used worldwide. The remote probe allows free positioning, even in the tightest places for even more precise measurements. The LED integrated in each adjustment button lights up as soon as the threshold is reached.
Any box or electrical control cabinet- Hysteresis (temperature): 2 K (±1 K tolerance) at +25°C (+77°F), 50% RH - Hysteresis (humidity): 4% RH (±1% tolerance) at +25° C (+77°F), 50% RH - Response time (humidity): approx. 5 sec. - Contact type: changeover (relay) - Service life: VDE: NO/NC > 15,000 cycles UL: NO/NC > 30,000 cycles - Max. (relay output): AC 240 V, 10 (1.6) A DC 60 V, 0.6 A¹ - Max. : AC 30 A for 10 sec. - Operating indicators: LED light diode - Connection: 5-pin terminal block, max. 0.5 Nm: solid wires/flexible wires² 2.5 mm² (AWG 14) -
