Français
Steel or stainless steel positioning bushes with status sensor
The positioning sleeves provide a support point for the bolt-shaped operating and locking elements, into which they can engage securely and precisely.
Positioning sockets with status sensor have a variably adjustable sensor on the socket. This allows you to electronically check whether or not a bolt is in the positioning sleeve.
If several sockets are used, it can be determined in which the operating or locking element is located.
Use: Positioning sleeves combined with a status sensor enable actuation-dependent process control. They also ensure that the control or locking element is in the desired location.
For example when adjusting the format on packaging machines.
Material: Positioning sleeve in steel or stainless steel 1.4034.
Stainless steel sensor.
Brass clamping nut. Finish: Positioning socket:
hardened and burnished steel.
Hardened and polished stainless steel.
Polished sensor.
Nickel-plated clamping nut. Note: Suitable for 03099 supports.
Condition sensor and clamping nut delivered unassembled.
Maximum tightening torque of the clamping nut: 1.2 Nm. Technical data: Inductive sensor:
Output circuit: PNP NO contact
Operating voltage: 10 - 30 V DC
Operating current: <100 mA
Switching distance: 1mm
Switching frequency: <3500 Hz
Short circuit resistance: yes
Reverse polarity protection: yes
Protection index: IP 67
Connection type: PVC 2 m cable
Temperature range: -25°C - +70°C
Approval: CE, c-UL-us, EAC Assembly:
The sensor is fixed and adjusted axially to the socket using the clamping nut. The sensor is finally fixed by tightening the clamping nut.
The detailed procedure is described in the assembly instructions. Safety: Positioning sockets with status sensor are not intended to protect people. Drawing reference:
Form B: with thread and base
Form C: with thread and approach cone
Form D: smooth
1) LEDs
