Français
Lockable stainless steel indexing plungers with stopper
Lockable indexing fingers are used when it is necessary to prevent movement of the stopping position due to transverse forces. Rotating the latch 180° causes the stop finger to retract, allowing the stop position to be changed. The stop notch makes it possible to maintain the lock in this position and the stop pin retracted.
The presence of a 180° stop prevents jumping of the notch and unlocking of the stop finger.
The choice of the side of the stop (left, right) makes it possible to determine the direction of rotation of the lock.
Benefits :
A 180° rotation of the lock causes the stop finger to retract.
Available with choice of color plastic locking caps.
180° stop with unilateral direction of rotation.
Material: Lock 1.4308.
Threaded sleeve and locking pin 1.4305.
Compression spring 1.4310.
PA thermoplastic locking cap. Finish: Polished threaded sleeve and latch.
Recrified and polished stop finger.
Polished compression spring.
Locking cap in different colors:
- dark gray RAL 7021.
- bright orange RAL 2004.
- rapeseed yellow RAL 1021.
- traffic red RAL 3020.
- traffic green RAL 6032.
- traffic blue RAL 5017.
- light gray RAL 7035. Accessories: Indexing pin support 03099.
Positioning sleeves 03099-50, 03099-60, 03099-61.
Drawing indication:
Form B: without locking cap, with locknut
Form C: with locking cap, without locknut
Form D: with locking cap, with locknut
