LV voltage detector: MS-917-PG

Voltage detection from 12 to 900 V AC and 1000 V DC

• Indication of voltage levels 12, 24, 50, 127, 230, 400, 600 and 900 V (700,1000 Vdc) by LEDs

high red brightness

• Sound indications: discontinuous sound up to 230V, continuous sound beyond

• Led indication of the TBT via a redundant circuit independent of the power batteries

• Voltage detector designed to be insensitive to the usual values of disturbing voltages of the

networks ≤ 400 Vac

• Polarity control and LED indication (-12, +12). The polarity LEDs are on

simultaneously in the presence of alternating voltage.

• Phase indicator from 127 Vac in unipolar mode (hand-held device)

• Continuity check with hands-free timed control button 10 s: R = 80Ω

• Built-in operation control device (cord continuity test included)

• Frequency range: 50-400 Hz ±3%.

• Operating temperature: -15°C to +45°C.

• Storage temperature: -15°C to +45°C

2/2

CATU SA 10 to 20 avenue Jean Jaurès  BP2  92 222 BAGNEUX – Cedex FRANCE

Telephone: (33) 01 42 31 46 00  Fax: (33) 01 42 31 46 31  www.catuelec.com

Edition: 01/2020 - Technical sheet No.: MS-917-PG

MS-917-PG

• Relative humidity (RH): 20% to 95%

• Degree of protection: IP65 / IK06.

• CAT IV-600V or CAT III-1000V

• Class II double insulation.

• Test tips Diam. 4 mm, L=23 mm, IP2X with trigger type sheaths complying with standard NF C18-510.

• Battery power supply: 2 AAA alkaline batteries supplied.