CEM-KEL-DS | Divisible EMC cable entry frames

CEM-KEL-DS | Divisible EMC cable entry frames

for cables with connector / IP55

The CEM-KEL-DS cable entry frame has been metallized (galvanised) to create a conductive surface.

The front cable gland (KT) is used for maintaining and sealing the cables. The cable shield is contacted over 360° via the rear conductive seal (CEM-KT).

The CEM-KEL-DS cable entry frame is compatible with the openings of 24-pole industrial connectors. Regarding the cutout width, you can also choose 46 mm instead of 36 mm, which allows you to introduce larger connectors.

Contact between the CEM-KEL-DS and the conductive housing wall is made via an included conductive gasket.