Français
Spindle for adjustable foot in steel or stainless steel
Our adjustable feet, of modular design, can be easily recomposed according to the intended application. Thus, they offer almost unlimited application possibilities, for example in the positioning of machines, installations or office furniture.
Our adjustable feet consist of a pin and a base. Each type of base assembles with each type of spindle in the range. The total height of the adjustable foot is calculated on the basis of the height of the spindle, increased by 30 mm. (total height of adjustable foot = L + 30 mm)
Material: Steel or stainless steel 1.4305. Finish: Blue passivated zinc plated steel
Natural stainless steel. Assembly: Insert the pin vertically into the base of the adjustable foot, then fix it, from the rear of the base, using the bolt previously fitted with the spacer ring and washer (this device prevents unexpected separation spindle and base). The two fixing holes are blocked, but can be easily drilled with a simple blow of a hammer and a punch. This way you can fix the adjustable foot to the floor. Height of the adjustable foot: Regardless of the type of spindle and base used, our adjustable feet have a minimum height of H = 30 mm (see fig. 2). The total height of the adjustable foot is calculated on the basis of the height of the spindle, increased by 30 mm. (Total height of adjustable foot = L + 30 mm)
