Safety / Hygiene / Environm...

Parking shade

PROSOLIA ENERGY

Tooling

Wire compression springs according to ISO 10243, for MDL press tools

MDL is a wide range of wire compression springs according to ISO 10243 standard: - square section wire, - round section wire. MDL offers wire compr...

AMDL

Control / Measure / Industr...

CTS Climatic and Thermal Service

CTS is a French company specializing since 1991 in consulting, design, development and manufacturing of test equipment for the simulation of climat...

Groupe CTS

Control / Measure / Industr...

CISTA Concept

CTS is a French company specializing since 1991 in consulting, design, development and manufacturing of test equipment for the simulation of climat...

Groupe CTS

Handling, Logistics, Storag...

TOR GTWY9-100 1-mast telescopic lifting platform / nacelle: 125KG/9M AC 230V

TOR GTWY9-100 Telescopic Mast Lift Platform: 125KG/9M/ AC 230V/1F/50HZ is one of the versions of the GTWY series of lifting platforms that lifts t...

TOR INDUSTRIES

Handling, Logistics, Storag...

GTWY6-100 1-mast telescopic lifting platform / nacelle: 125 kg, 6M, 230V / 1F / 50HZ

The TOR GTWY mobile telescopic lifting platform/nacelle is ideal equipment for working at height. Due to its compact size, it can be used both in ...

TOR INDUSTRIES

Handling, Logistics, Storag...

TOR GTWY6-100 1-mast telescopic lifting platform: 125KG/6M/DC (battery)

TOR GTWY6-100 Telescopic Boom Lift/Elevating Platform is one of the versions of the GTWY series of aerial platforms that lifts the operator up to a...

TOR INDUSTRIES

Tooling

MDL standardized elements for the construction of column blocks

MDL is a brand of standard elements used in the design of die sets for press tools and cutting tools. MDL's offer consists of: - components standar...

AMDL

Tooling

MDL standardized guide elements for the design of column block guide systems

MDL a range of standardized components for the construction of die sets for cutting tools and press tools. MDL is a registered trademark, property ...

AMDL

Electronics

DF-2

Are you looking for an absolute cutting-edge system? The DF-2 system is a modular concept based on a subassembly construction principle and the pro...

SGC - SWITCHGEAR COMPANY SA

Electronics

DR-6: public HTA distribution approved by Enedis

SGC has developed the DR-6 range , 24 kV – 400A fully insulated switchboards and functional units to meet the highest requirements of HTA distribu...

SGC - SWITCHGEAR COMPANY SA

Tooling

MDL standardized components for the construction of press tool column blocks

MDL brand standardized components are standard elements used for the design of dies sets, using for  the construction of cutting tools and pre...

AMDL

Tooling

MDL standard components: guide elements according to DIN 9825

MDL is a registered trademark of standardized components for the construction of press tools; property of AMDL Scop SA. MDL offers a wide range of ...

AMDL

Tooling

MDL a complete range of standardized elements for the construction of press tools

MDL is a registered trademark owned by AMDL Scop SA, which offers a complete range of standardized elements for the construction of press tools inc...

AMDL

Automation / Mechatronics /...

Self-gripping base for screw mounting

This hook and loop base serves as an installation aid for gently securing wires, cables and pipes. This base is already equipped with a Velcro stri...

NORELEM

Assembly, fastening

Support for surface elements (multibloc 25) type B and type I

The brackets allow surface elements to be easily fixed to aluminium profiles. This bracket can be pivoted to any position in the profile groove. P...

NORELEM

Assembly, fastening

Compact tensioner

By operating the adjustment screw, the clamping arm can be adjusted in height without additional shims and the workpiece can be clamped. Benefits :...

NORELEM

Machining and material remo...

Automated pull cylinder

Repeatability is ±0.3 mm. To remove shavings and dust, remove the two cover caps (2) and blow compressed air from above. Instructions for use: ...

NORELEM

Assembly, fastening

Aluminum quick-release lever with internal thread or tapping, plastic pressure washer and steel or stainless steel threaded stud, inch

This cam lever has a technically optimized plastic pressure washer. This pressure washer is made of a special high-performance plastic material, wh...

NORELEM

Assembly, fastening

Stainless steel lockable indexing finger with thread lock

Lockable indexing fingers are used when it is necessary to prevent movement of the stop position due to transverse forces. A 180° rotation of the l...

NORELEM

Machining and material remo...

ES fixed jaws for multiple clamping system

The ES fixed jaws are positioned on the slides depending on the clamping situation. The teeth ensure a secure connection by tightening the fixing s...

NORELEM

Control / Measure / Industr...

Aluminum articulated brackets with magnetic foot

norelem 3D articulated supports stand for perfect measurements down to the μ range, maximum ease of use, perfect stability, very high holding force...

NORELEM

Automation / Mechatronics /...

Steel guide bushings with centering collar

Steel guide bushings with centering collar are components that can be used in tool and mold manufacturing. They are used to provide precise guidanc...

NORELEM

Automation / Mechatronics /...

Steel guide columns with centering collar

Steel guide columns with centering collar and two centering diameters offer a solution for precise guiding operations in demanding applications. Th...

NORELEM