Clamping devices, others

Machining and material remo...

UNI lock double clamping module

Parts with complex geometry can thus be completely machined from 4 or 5 sides. UNI lock double clamping modules can be mounted in any position. Hig...

NORELEM

Assembly, fastening

Spindle with quick-release system

Spindle with quick-release system for additional time saving when fitting. Insert the spindle into the bore and press the button. The three balls a...

NORELEM

Assembly, fastening

Multiple clamping systems with double-sided clamping jaws Fixed jaw ES

Several multiple clamping systems of different lengths can be mounted one behind the other or next to each other. The precision toothing allows ver...

NORELEM

Assembly, fastening

Clamping slides for multiple clamping system

Several slides of different lengths can be mounted one behind the other or next to each other. The precision toothing allows very precise positioni...

NORELEM

Machining and material remo...

Stationary 3-jaw steel chucks

Stationary 3-jaw chucks are particularly suitable for centered clamping of workpieces on drilling and milling machines. The flexible arrangement of...

NORELEM

Machining and material remo...

UNILOCK ESM 138-C clamping module

UNILOCK clamping modules can be installed on machine tables or devices (plates, cubes, towers, etc.), with or without overhang, and in any position...

NORELEM

Assembly, fastening

Vertical lever toggle clamp with horizontal base

Clamps offer effective solutions when it comes to clamping or positioning a workpiece economically and, above all, quickly. The toggle clamps work ...

NORELEM

Assembly, fastening

Horizontal stirrup toggle clamp with attachment

The clamps are particularly suitable for quickly closing and fixing lids and flaps. The adjustment stroke on the caliper can be adjusted individual...

NORELEM

Machining and material remo...

Stationary 4-jaw steel chucks

Stationary 4-jaw chucks are particularly suitable for centered clamping of workpieces on drilling and milling machines. The flexible arrangement of...

NORELEM

Machining and material remo...

UNILOCK ESA 138 clamping module

UNILOCK clamping modules can be installed on machine tables or devices (plates, cubes, towers, etc.), with or without overhang, and in any position...

NORELEM

Machining and material remo...

Black steel toggle clamp, vertical with horizontal foot and adjustable pressure pin

The black clamps are specially adapted for optical metrology. Their black surface prevents reflections during measurements and shots.

NORELEM

Machining and material remo...

Automated pull cylinder

Repeatability is ±0.3 mm. To remove shavings and dust, remove the two cover caps (2) and blow compressed air from above. Instructions for use: ...

NORELEM

Assembly, fastening

Fixed stop with gripping insert for clamping system by plating

The fixed stop with gripping insert is used as a counterpart for the clamping element with gripping insert 04486. Thanks to its extremely stable s...

NORELEM

Machining and material remo...

Extensions for UNILOCK ESM 138-C clamping modules

The module risers can be attached to the UNILOCK clamping modules via two zero-point exchange interfaces. This installation is possible with a cent...

NORELEM