Fluor drilling machine FLOTT SB 30 FB Plus

Technical characteristics :

Flow drilling capacity on 3 mm thick sheet metal: 18 mm

Drilling capacity (continuous/normal): 30/35 mm (E335/ST60) / Measured torque: 200 Nm

Tapping capacity max. : M30x3.5

Spindle: CM3 - Concentricity < 0.01 mm

Spindle stroke: 125 mm

Spindle/column distance: 300 mm

Column diameter: 125 mm

Spindle/table distance: 150-700 mm

Useful table surface (L x W): 590 x 450 mm

Table: 2 T-slots / Center distance: 160 mm / Width: 14/26 mm

Table height adjustment: by rack

Speed indicator: digital

Drilling depth indicator: digital

Depth stop: fine adjustment

Advance: manual

400 V three-phase motor with frequency converter: 3.0 kW

Continuous spindle speed variation: 0-4000 rpm

Dimensions (W x D x H): 610 x 900 x 1980 mm

Weight: 370kg

Ref. : 230503

Standard equipment:

Main switch

Digital tapping device

Operator panel with OLED display

High quality rotomolded cover opens to the side and slopes for easy reading of data

LED lighting

Quick-adjust depth stop

Infinite speed adjustment via the central knob of the operator panel

Emergency stop punch

Thermal overload protection

spindle stop

Electric lock drill guard

Connection cable with plug (1.5 m)

3 year warranty for unposted use

Special executions:

360° rotatable combined vice table with graduated scale. Jaw width: 120 mm. Opening: 105mm. Table surface: 350 x 350 mm Ref. 290135

Grooved base Ref. 290378

Grooved base with sprinkler pump. Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290160C

LED lighting with adjustable arm Ref. 290020

Watering device (separate container). Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290340

Start/stop with pedal:

Drilling mode: spindle on/off

Tapping mode: right/left rotation

Ref. 231000

About flow drilling:

Flow drilling consists of drilling through friction and deformation of thin metallic materials by generating a discharge of material.

The collar thus generated makes it possible to increase by 3 to 5 times the number of threads engaged after tapping. This technique is used to make very resistant assemblies.

Advantages of flow drilling:

Low tapping cost

Highly resistant assemblies

High quality nets

No specific equipment

Low implementation cost

Without additional material (welded nut, insert)

Fewer production cycles

No chip production

FLOTT recommends the UNIMEX FORMDRILL flow-drilling and flow-tapping systems demonstrated on the stand. See www.fluopercage.fr