Fluor drilling machine FLOTT SB 20 FB Plus
Technical characteristics :
Flow drilling capacity on 3 mm thick sheet metal: 8 mm
Drilling capacity (continuous/normal): 20/23 mm (E335/ST60)
Tapping capacity max. : M14
Spindle: CM2 - Concentricity < 0.01 mm
Spindle stroke: 100 mm
Spindle/column distance: 240 mm
Column diameter: 82 mm
Spindle/table distance: 160-880 mm
Useful table surface (L x W): 340 x 280 mm
Table: 2 T-slots / Center distance: 125 mm / Width: 13/26 mm
Height adjustment of the drilling head: by rack
Speed indicator: digital
Drilling depth indicator: digital
Depth stop: ring with quick-adjust stop
Advance: manual
400 V three-phase motor with frequency converter: 1.5 kW
Continuous spindle speed variation: 40-4000 rpm
Dimensions (W x D x H): 355 x 705 x 1825 mm
Weight: 195kg
Ref. 220115
Standard equipment:
Digital tapping device
Operator panel with OLED display
Rotationally molded, robust and high quality cover, angled for easy reading of data
LED lighting
Quick-adjust depth stop
Infinite speed adjustment via the central knob of the operator panel
Emergency stop punch
Thermal overload protection
spindle stop
Electric lock drill guard
Connection cable with plug (1.2 m)
3 year warranty for unposted use
About flow drilling:
Flow drilling consists of drilling through friction and deformation of thin metallic materials by generating a discharge of material.
The collar thus generated makes it possible to increase by 3 to 5 times the number of threads engaged after tapping. This technique is used to make very resistant assemblies.
Advantages of flow drilling:
Low tapping cost
Highly resistant assemblies
High quality nets
No specific equipment
Low implementation cost
Without additional material (welded nut, insert)
Fewer production cycles
No chip production