FLOTT SB P40 STG PV electronic Plus tapping drill press
The P40 STG PV electronic is a very powerful machine for drilling up to 40 mm in diameter in unalloyed mild steel and belongs to the Classic range. The machine has automatic and continuous Z-axis feed. The optional transparent cover is a real eye-catcher. The drive is provided by a maintenance-free three-phase motor. The speed can be continuously adjusted using the adjustment lever on the side. Depending on the customer's needs, the machine is available with two speed ranges and special optional equipment such as chip breaker module, spindle stop module and sequential feed. You can choose between three machining modes: conventional drilling, with automatic feed and tapping. For each of them, you can adjust the associated parameters separately according to the type of operation. The drilling depth stop allows you to set and limit the drilling depth. To do this, position the tool on the surface of the workpiece, set the zero point, select the drilling depth by lowering the lever then fix the depth stop. A wheel then allows you to precisely adjust the drilling depth. The robustly designed table can be adjusted in height simply and precisely using a rack drive. In order to be able to guarantee optimum working safety, the drill is fitted with an electrically locked drill guard and a standard emergency stop button.
Technical characteristics :
Drilling capacity (continuous/normal): 35/40 mm (E335/ST60)
Tapping capacity max. : M30
Spindle: CM4 - Concentricity < 0.01 mm
Spindle stroke: 160 mm
Spindle/column distance: 300 mm
Column diameter: 125 mm
Spindle/table distance: 150-700 mm
Useful table surface (L x W): 590 x 450 mm
Table: 2 T-slots / Center distance: 160 mm / Width: 14/26 mm
Height adjustment of the drilling head: by rack
Speed indicator: digital
Drilling depth indicator: digital
Depth stop: fine adjustment
Programmable digital advance with electromagnetic clutch and digital display: 0-300 mm/min
Three-phase motor 400 V reversible poles: 1.5/3.0 kW
Continuous spindle speed variation with intermediate shaft:
R1: 100-2000 rpm
R2: 70-1400 rpm
Dimensions (W x D x H): 610 x 850 x 1920 mm
Weight: 440kg
Ref. 205226: R1 with transparent cover
Ref. 205227: R2 with transparent cover
Ref. 205208: R1 with gray cover
Ref. 205209: R2 with gray cover
Standard equipment:
Drilling depth adjustment with fine adjustment stop and undervoltage coil
Emergency stop punch
Stepless speed adjustment
Table height adjustment by rack
Connection cable with plug (1.5 m)
Electric lock drill guard
Thermal overload protection
Digital display of drilling depth and rotation and feed speeds
Programmable electronic feed with spindle rotation control
Programmable end-of-run delay
Programmable digital tapping device. Tapping capacity max. M20. Adjustment of the tapping depth via the digital display
Easy to program depth stop
Drill levers with electromagnetic clutch control button (on/off)
Optional transparent cover, at no extra charge
Standard LED lighting
3 year warranty for unposted use
Special executions:
360° rotatable combined vice table with graduated scale. Jaw width: 120 mm. Opening: 105mm. Table surface: 350 x 350 mm Ref. 290135
Grooved base Ref. 290378
Grooved base with sprinkler pump. Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290160C
LED lighting with adjustable arm Ref. 290020
Watering device (separate container). Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290340
Digital options for PV electronic:
Safety module - Automatic spindle stop in high position Ref. 290613
Clearing cycle - Chipbreaker module to prevent the formation of long chips Ref. 290612
Sequential feed 4 programmable speeds for 4 feed steps Ref. 290614