FLOTT SB 40 NC Plus tapping drill press
The SB 40 NC Plus is our highest level of development of the Plus Series and at the same time the most powerful machine with its maintenance-free three-phase motor with very high torque. This machine, available in R1 to R3 versions, can continuously drill diameters of up to 40 mm in unalloyed mild steel. You can choose between manual and automatic operation modes. In automatic mode, the CNC Z-axis can be individually programmed for different types of operations and applications. In manual mode, machine functions and settings, such as rotational speed, can be easily adjusted to a wide range of applications via the control panel. The built-in OLED display clearly shows you current settings and operating parameters such as RPM and drilling depth. At the push of a button, you can choose between drilling or tapping mode, which can then be programmed intuitively. You can switch from manual mode to automatic mode with a flick of the wrist. You can control and program the automatic mode via the lower additional panel. You then have the choice between a wide variety of operations and can easily enter the associated machining data via the touch screen. The infinitely variable and intelligently controlled Z-axis even allows automated tapping based on pitch. The drilling depth stop allows you to adjust and limit the drilling depth in a simple and ergonomic way. To do this, position the tool on the surface of the workpiece, set the zero point, select the drilling depth and then tighten the drilling depth stop. In this way, we have limited the stroke to the desired drilling depth. A wheel then allows you to precisely adjust the drilling depth. The robustly designed table can be adjusted in height simply and precisely using a rack drive. To guarantee optimal working safety, the drill is equipped with an electrically locked drill guard and a standard emergency stop button. In order to be able to complete a drilling operation safely, you can also activate a spindle stop function.
Technical characteristics :
Drilling capacity (continuous/normal):
R1: 30/35 mm (E335/ST60) / Torque measured: 135 Nm
R2: 27/32 mm (E335/ST60) / Torque measured: 90 Nm
R3: 35/40 mm (E335/ST60) / Torque measured: 260 Nm
Tapping capacity max. :
R1: M30x3.5
R2: M24x3
R3: M36x4
Spindle: CM4 - Concentricity < 0.01 mm
Spindle stroke: 160 mm
Spindle/column distance: 300 mm
Column diameter: 140 mm
Spindle/table distance: 150-700 mm
Useful table surface (L x W): 590 x 450 mm
Table: 2 T-slots / Center distance: 160 mm / Width: 14/26 mm
Table height adjustment: by rack
Speed indicator: digital
Drilling depth indicator: digital
Depth stop: fine adjustment
Forward/return stroke: 0-1.5 m/min
400 V three-phase motor with frequency converter: 4.0 kW
Continuous spindle speed variation:
R1 (stage 1): 0-1000 rpm
R2 (stage 1): 0-1600 rpm
R3 (stage 2 with intermediate shaft): 0-4000 rpm
Dimensions (W x D x H): 610 x 900 x 1980 mm
Weight: 440kg
Ref. R1: 230540
Ref. R2: 230541
Ref. R3: 230542
Standard equipment:
Main switch
Digital tapping device
Operator panel with OLED display
High quality rotomolded cover opens to the side and slopes for easy reading of data
LED lighting
Quick-adjust depth stop
Infinite speed adjustment via the central knob of the operator panel
Emergency stop punch
Thermal overload protection
spindle stop
Electric lock drill guard
Connection cable with plug (1.5 m)
3 year warranty for unposted use
Auto/manual switch lever
Operator panel with screen and central wheel in metal
Cancellation of data entry
Drilling/tapping function selection
Drill cycle counter
Additional screen with touch control (activation by positioning the lever on automatic)
4.3'' touch screen
Convenient human-machine interface for programming the Z axis (advance, return stroke)
Selection of functions: drilling, boring, milling, flow drilling, tapping
Free programming
Extensive choice of machine settings
Special executions:
360° rotatable combined vice table with graduated scale. Jaw width: 120 mm. Opening: 105mm. Table surface: 350 x 350 mm Ref. 290135
Grooved base Ref. 290378
Grooved base with sprinkler pump. Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290160C
Watering device (separate container). Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290340
Start/stop with pedal:
Drilling mode: spindle on/off
Tapping mode: right/left rotation
Automatic mode: program start/stop
Ref. 231000