FLOTT SB 30 Plus tapping drill press
The SB 30 Plus is a high capacity drill available in R1 to R3 versions. It is a very powerful machine suitable for 30mm continuous drilling capacity in non-alloy mild steel such as E335. The drive is provided by a maintenance-free, continuous-duty three-phase motor. Depending on customer requirements, the machine is available with three speed ranges and optional special equipment such as a grooved base. Machine functions and settings, such as rotational speed, can be easily adjusted via the control panel. The built-in OLED display clearly shows you current settings and operating parameters such as RPM and drilling depth. At the push of a button, you can choose between drilling or tapping mode, which can then be programmed intuitively. The lower switch bar can be used to control the standard LED lighting and the optional cooling unit. The drilling depth stop allows you to adjust and limit the drilling depth in a simple and ergonomic way. To do this, position the tool on the surface of the workpiece, set the zero point, select the drilling depth and then tighten the drilling depth stop. In this way, we have limited the stroke to the desired drilling depth. A wheel then allows you to precisely adjust the drilling depth. The robustly designed table can be adjusted in height simply and precisely using a rack drive. To guarantee optimal working safety, the drill is equipped with an electrically locked drill guard and a standard emergency stop button. In order to be able to complete a drilling operation safely, you can also activate a spindle stop function.
Technical characteristics :
Drilling capacity (continuous/normal):
R1: 27/32 mm (E335/ST60) / Torque measured: 100 Nm
R2: 25/30 mm (E335/ST60) / Torque measured: 70 Nm
R3: 30/35 mm (E335/ST60) / Torque measured: 200 Nm
Tapping capacity max. :
R1: M24x3
R2: M20x2.5
R3: M30x3.5
Spindle: CM3 - Concentricity < 0.01 mm
Spindle stroke: 125 mm
Spindle/column distance: 300 mm
Column diameter: 125 mm
Spindle/table distance: 150-700 mm
Useful table surface (L x W): 590 x 450 mm
Table: 2 T-slots / Center distance: 160 mm / Width: 14/26 mm
Table height adjustment: by rack
Speed indicator: digital
Drilling depth indicator: digital
Depth stop: fine adjustment
Advance: manual
400 V three-phase motor with frequency converter: 3.0 kW
Continuous spindle speed variation:
R1 (stage 1): 0-1000 rpm
R2 (stage 1): 0-1600 rpm
R3 (stage 2 with intermediate shaft): 0-4000 rpm
Dimensions (W x D x H): 610 x 900 x 1980 mm
Weight: 370kg
Ref. R1: 230500
Ref. R2: 230501
Ref. R3: 230502
Standard equipment:
Main switch
Digital tapping device
Operator panel with OLED display
High quality rotomolded cover opens to the side and slopes for easy reading of data
LED lighting
Quick-adjust depth stop
Infinite speed adjustment via the central knob of the operator panel
Emergency stop punch
Thermal overload protection
spindle stop
Electric lock drill guard
Connection cable with plug (1.5 m)
3 year warranty for unposted use
Special executions:
360° rotatable combined vice table with graduated scale. Jaw width: 120 mm. Opening: 105mm. Table surface: 350 x 350 mm Ref. 290135
Grooved base Ref. 290378
Grooved base with sprinkler pump. Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290160C
Watering device (separate container). Maximum capacity 15 l. Maximum flow 30 l/min Ref. 290340
Start/stop with pedal:
Drilling mode: spindle on/off
Tapping mode: right/left rotation
Ref. 231000