Français
Aluminum profile spring hinges 0.35 Nm
The hinges are equipped with an integrated steel tension spring. This allows the automatic opening and closing of doors and shutters.
Free-operating hinges can be combined with spring hinges due to their identical dimensions and appearance.
Opening angle 270°.
Material: Aluminum 6060 T5.
Cover cover in PA 6.6.
POM washers. Finish: Anodized, black. Spring torque at opening:
M(0°): 0.35 Nm / M(90°): 0.24 Nm / M(180°): 0.12 Nm
Spring torque at closing:
M(0°): 0.12 Nm / M(90°): 0.24 Nm / M(180°): 0.35 Nm
The hinges are designed for more than 30,000 operating cycles.
Fixing using cylindrical head screws according to DIN 912/ DIN EN ISO 4762.
The specified hinge load values are non-binding indicative values, do not take into account safety factors and exclude any liability. The values indicated are intended exclusively for information purposes and do not constitute a legal guarantee of the properties.
Load values were determined under laboratory conditions. Each user must determine for themselves whether the hinge is suitable for the intended application.
The different materials on which the hinges are fixed and the types of fixing, climatic conditions as well as wear can influence the defined values. Temperature range: -20 °C to +80 °C Accessories: Cylindrical head screw with hexagon socket DIN 912/ DIN EN ISO 4762.
