Pneumatic clamp and clamp

The pneumatic clamp is suitable for clamping workpieces that are to be machined from above. Thanks to the lateral clamping, the upper machining surface is completely free. The tacking clamps are actuated by compressed air. The large pivoting angle of the clamping arm allows easy insertion and removal of the workpiece. This ensures optimum access to the room. The block-shaped body offers various mounting possibilities, so that the pull-down clamp can be mounted optimally near the workpiece. Pull-down clamps are available with smooth or serrated jaws. It thus becomes possible to clamp blank parts or pre-machined parts.
Pneumatic pull-down clamps can also be attached to different locations in the workpiece and actuated in a predefined sequence. The order is made manually or using a machine. Pneumatic pull-down clamps are actuated using compressed air. This relieves the user, especially in case of repetitive tightening operations.

The pneumatic clamp is suitable for clamping workpieces. The clamps are actuated by compressed air. The large pivoting angle of the clamping arm allows easy insertion and removal of the workpiece. This ensures optimum access to the room. The block-shaped body offers various mounting options, so that the clamp can be optimally mounted near the part to be clamped. Oscillating ball mounts with smooth or ribbed surface can also be installed on the clamp arm of the clamp. It thus becomes possible to clamp blank parts or pre-machined parts.
Pneumatic clamps can also be attached to different locations in the workpiece and actuated in a predefined sequence. The order is made manually or using a machine. Pneumatic clamps are operated using compressed air. This relieves the user, especially in case of repetitive tightening operations.

- Tightening - Clamping - Machining